Multi-stage purification process of RO & UV gives total protection from bacteria and viruses
Fully automatic operation with auto-start and auto-off
TastePure 250 - 10,000 LPH commercial and industrial water purifier provides multi-stage water purification such as RO & UV which in turn purifies water without any dissolved impurities such as chemicals and minerals. Nector also has TDS controller which keeps essential natural minerals in the water, and provides 100% pure, tasty and safe drinking water for your consumption.
Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane. This membrane-technology is not properly a filtration method. In RO, an applied pressure is used to overcome osmotic pressure, a colligative property, that is driven by chemical potential, a thermodynamic parameter. RO can remove many types of molecules and ions from solutions and is used in both industrial processes and in producing potable water. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective," this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely.
UV radiation from ultraviolet water systems alone is not suitable for water with high levels of suspended solids, turbidity, color, or soluble organic matter. These materials can react with UV radiation, and reduce disinfection performance. Water turbidity makes it difficult for the ultraviolet radiation to penetrate water. If your water supply has these characteristics, a sediment prefilter (5 micron or less) should be installed before your UV water purification system to remove particulate matter prior to UV water disinfection.
The FRP vessels are cost-effective, easy to handle & non-corrosive pressure vessels for your residential,
commercial & industrial water treatment. Pressure Vessels are manufactured with state-of-the art technologies
and are designed and engineered to operate under severe conditions. They are made up of high performance composite
liner and the outer shell is reinforced with epoxy- fiber glass windings